EUROPEAN and AUSTRALIAN MODEL
DUAL OUTPUT RING GENERATOR
SPECIFICATIONS for MODEL RP60-2A-173-64B
| INPUT POWER: | 103-132/206-264VAC via IEC 320 Connector on assembly |
| DC OUTPUT: | -48VDC @1A (-24VDC@1.5 is an option) |
| DC OUTPUT REGULATION: | Less than 1% |
| DC OUTPUT RIPPLE: | Less than 1% peak to peak |
| OUTPUT ISOLATION: | -48 VDC isolated from chassis ground. |
| AC output is referenced to -48VDC output. | |
| AC OUTPUT: | 72VAC@0.12A (93VAC@0.12A is an option) |
| AC OUTPUT FREQUENCY: | 25Hz +/- 10% is standard. 20 Hz, 30Hz, and other frequencies available. |
| AC OUTPUT REGULATION: | Less than 10% for the full input voltage range and no load to full load. |
| AC OUTPUT WAVEFORM: | Simulated sine wave with less than 20% distortion. |
| OUTPUT CONNECTOR: | AMP #1-480701-0 |
| OUTPUT PIN ASSIGNMENTS | 1)72VAC,2)Common,3)-48DC |
| CURRENT LIMITING: | Both outputs have current limiting with full protection and autorecovery. |
| OUTPUT INDICATOR: | A green LED indicates that both outputs are operating. |
| TEMPERATURE RANGE: | Ambient temperature range is 0 to 50 degrees C for full load operation. |
| CONSTRUCTION: | Enclosed assembly with removable cover. |
| SIZE & WEIGHT: | 5.10H x 7.90L x 2.70W - About 2lbs. |
| EMI TEST APPROVALS: | EN5502, Class B, EN55082-1, AS/NZS3548, Class A |
| SAFETY APPROVALS: | EN60950, UL1950, CSA C22.2-950 & AS/NZS3260 |
| C E MARK: | Qualified to apply |
| C-TICK MARK: | Qualified to apply |
