DUAL OUTPUT RING GENERATOR
SPECIFICATIONS for MODEL RP30
| DESCRIPTION: | One of a series designed to occupy a single PC-ISA slot and power an analog telephone interface board. |
| INPUT POWER | Powered from host PC. Maximum PC loading is + 5V @ 5A and |
| + 12V @2.5A. | |
| DC OUTPUT: | -48VDC @ 0.4A (-24VDC@0.6 is an option) |
| DC OUTPUT REGULATION: | Less than 1% |
| DC OUTPUT RIPPLE: | Less than 1% peak to peak |
| OUTPUT ISOLATION: | -48 VDC referenced to chassis ground. AC output is referenced to the -48VDC output. |
| AC OUTPUT: | 93 VAC @ 0.05A |
| AC OUTPUT FREQUENCY: | 20Hz +/-10% is standard. Any other single frequency or switch selectable 17,20,25 and 50Hz, +/- 10% is an option |
| AC OUTPUT REGULATION: | Less than 10% for the full input voltage range and from no load to full load |
| AC OUTPUT WAVEFORM: | Simulated sine wave with less than 20% distortion |
| CURRENT LIMITING: | All outputs have current limiting with full protection and automatic recovery |
| OUTPUT INDICATOR: | Green LED indicates that all ouputs are operating |
| OUTPUT CONNECTOR: | Molex 70553-0040 |
| TEMPERATURE RANGE: | Ambient temperature range is 0 to 50 degrees C for full load operation. |
| CONSTRUCTION: | Open frame construction on plug-in PC-AT board. |
| EMI DESIGN STANDARDS: | Compliance with FCC 20780, Class B and EN55022, Class B and EN50082-1 |
| SAFETY DESIGN STANDARDS: | Compliance with EN60950, UL1950 and CSA C22.2-950
|
